Your position: Home
-
DescriptionSpecifications·1/4'' 1 Mega pixel CMOS image sensor·Low power consumption·Ultra long standby·Battery power supplyRemote wake-upThe doorbell will be in a sleep mode to save power; you can have a previewin App and have a remote wake-up to monitor after 3-4 Seconds.Full-duplex audioWhen the visitor push the doorbell button, you will get a call. You can seeand hear the vistor in your App from the doorbell if you answer.PIRWhen the doorbell detects someone stopping by, it sends an alarm messageto your cell phone.Battery LockAfter battery box connected ,it will be locked immediately. User have to unlockthe battery box in the App setting page to if want to take out the battery box,only30 seconds allowed.IntallationInstallation of Power supply modeWarning:Don't fall down during usingStep 1: Each input-cable (AC8~24V) connect to the wires which come out of the wall.Step 2: Remove the bottom cover and bracket of the doorbell host and lead the output terminal.Connect to the power interface on the back of the doorbell host.Note: red lead connects the power "+", white connects the power "-".Step 3: Remove the double-sided adhesive on the back of the mylar sheet.Cover the position of the power interface on the back of the doorbell host.Step 4: Use the marker to draw the positions of the 4 screw holes on the wall surface to be installed.Step 5: Screw 4 expansion screws into the newly marked position.Step 6: Fix the mounting bracket to the wall.Step 7: Install the bottom door of the doorbell main unit and fix it with screws.Step 8: Pull the power cable from the center hole of the bracket and slowly insert the doorbell into the door as shown in the above figure (be careful not to catch your finger).Install the device in battery-powered modeStep 1: Remove the doorbell bottom cover and bracket as shown in the figure.Step 2: Use the marker to draw 4 screw holes on the surface of the wall to be installed.Step 3: Screw 4 expansion screws into the newly marked position.Step 4: Fix the mounting bracket to the wall.Step 5: Snap the doorbell into the bracket.Step 6: Align the battery box with the bayonet lock, and push the battery box into doorbell.Package Listing
-
About Zemismart
-
About PaymentZemismart accept PAYPAL payment method.
It is allow you pay by Visa, MasterCard, American Express, Discover.
1. Choose paypal payment.
2. Place order.
3. Pay with Debit or Credit Crad.
4. Now you can choose Visa, MasterCard, American Express or Discover as your like.
-
ContactJudy Chan
Skype:+86 15018062694
Whatsapp:+86 15018062694
Wechat:943180996
QQ:943180996
Zemismart.com -
GuideUser Manual Download
32933067660
SKU:
32933067660